TACK3D Advanced Build-Plate Adhesive User Guide

TACK3D Advanced Adhesive Provides a Strong Bond to Virtually Eliminate Warping for ABS, ASA, PLA, PETG, and CPE Filament on both Heated, and Non-Heated Build Plates. TACK3D comes in 3.5 fl oz (110ml) application bottles that have a built-in angled sponge applicator; making it easy to apply.

TACK3D was formulated to solve the challenges of first layer adhesion by enhancing your print surface so that it grabs hold of that critical first layer; In many cases you can print without rafts or build plate adhesion layers, saving you material and time.

Helping you get the most out of your 3D printing projects is our number one priority. Whether it’s our adhesives, tools or accessories. If you have any questions about TACK3D please email us at: info[at]tack3d.com

TACK3D is optimized for PLA, ABS, PETG, ASA and CPE filaments and can be used on both heated and non-heated glass build plates. However, it is not suitable for Nylon or PP. If your build plate is made of aluminum, apply Kapton tape or blue masking tape before using TACK3D.

TACK3D is 100% safe, non-toxic, and water-soluble, with virtually no odor. Plus, it comes with an unconditional 90-day money-back manufacturer's guarantee, so you can try it risk-free. Upgrade your 3D printing experience today with TACK3D Advanced Build-Plate Adhesives!


1) Prepare your 3D printer per your specific manufacturers instruction

2) IMPORTANT NOTE: For strong first layer adhesion, level and clean the build-plate before using TACK3D

3) Shake Bottle Well before Using

4) Using the bottle applicator, apply a thin, even layer of TACK3D adhesive to the build plate

5) Begin your 3D Print Job

6) Once your print job is complete, let build plate cool completely before removing.

7) IMPORTANT NOTE: To remove a stubborn part, wait for the build-plate to completely cool, apply a drop of water along the edges of your parts, and wait a few minutes before using a removal tool on a corner.